21 апр. 2010 г. · Inside rail is 2x1/4 flat with 1x1x1/4 angle welded 3/4" from top of 2" flat. Creating a lip for ply sit on. Top lip that sits on deck and ... |
28 февр. 2008 г. · 3" medium channel with 2x3/16 angle for the runners. I also placed a 2x3/8 flat bar over the angle that fits onto the ramp lip on the trailer. |
13 июл. 2020 г. · I built ramps using 4 inch channel with 3/16 angle as the rungs. They are plenty strong, but do require assist springs because of the weight. |
16 мар. 2011 г. · Try this first. I jacked up the bottom of my ramp by making a plate of 2x10's designed to raise the tires up 3" before loading the ramp. |
6 нояб. 2016 г. · Metal on the dove. Angle iron or channel. Not plate, helps with cleaning the tires when loading. Plate and wood is extremely slippery and dangerous. |
13 июн. 2017 г. · Cut a wedge shape of wood to attach to back of the ramp pocket. When you slide in the ramp it works in to the wedge to stop the rattle on that end. |
25 янв. 2020 г. · That means a trailer loading ramp needs to be less than 11.4 degrees. 37" from the front tire, the ground clearance is only 7-3/8. This works ... |
25 февр. 2014 г. · I've seen where people have put wood, such as a couple of 2 foot long pieces of 2x8 under the ramps to reduce the loading angle. I also have ... Не найдено: iron | Нужно включить: iron |
| Novbeti > |
| Axtarisha Qayit Anarim.Az Anarim.Az Sayt Rehberliyi ile Elaqe Saytdan Istifade Qaydalari Anarim.Az 2004-2023 |