Hex Nuts securing the Plow Bottom to the. 6 swath. • Adjust the Plow Couiter to its highest position. • Go and make your first two furrows as described in ...

Продолжительность: 11:23
Опубликовано: 22 сент. 2022 г.

Mount the completed assembly to the left side of plow beam using coulter clamp (12), U-bolt (13). spacer (14). Insert spacers between beam halves and secure ...

Продолжительность: 10:31
Опубликовано: 12 июн. 2024 г.

The 13 gauge steel coulter blade slices through sod and soil while the hardened steel plow effortlessly digs the 8′′-10′′ furrow.

To turn the plow point into the ground when opening the furrow, use the depth adjustment crank (Fig. C). Adjust plow point downward until a satisfactory ...

30 янв. 2012 г. · The brinly plows were designed to operate with out down pressure. You may want to try a manual bypass valve or something that allows you to have ...

22 окт. 2018 г. · Set up and use a 5" high platform that will span both front and rear tires on the tractor (about 6 ft long ) and drive the left side on to the ... Frustrated with my brinly plow | Weekend Freedom Machines Teach me about GT/Brinly Moldboard plows plowing with a brinly | Weekend Freedom Machines Wheel attached to a brinly hardy moldboard plow Другие результаты с сайта www.wfmachines.com

NOTE: Be sure tractor hitch is properly adjusted so as not to hold plow out of ground when tractor lift lever is lowered. After the dead furrow has been made, ...