A standard toeboard shall be 4 inches (nominal) minimum in vertical height from its top edge to the level of the floor, platform, runway, or ramp.

Toe Board Height Requirements: 29(k)(1)(ii): “have a vertical minimum height of 3.5 inches (9 cm) as measured from the top edge of the toeboard to the level of ...

The railing shall be provided with a toeboard where the platform, runway, or ramp is 6 feet or more above places where employees normally work or pass and the ...

26 мар. 2010 г. · A toeboard shall be erected along the edge of platforms more than 10 feet (3.1 m) above lower levels for a distance sufficient to protect employees below.

According to OSHA 1910.29(k)(1), the new toeboard requirement needs to be at least 3.5" tall, with no more than a 1/4" gap at the bottom. It also must be able ...

5 сент. 2023 г. · Both Federal OSHA and Cal/OSHA require toeboards to be a minimum of 3.5 inches tall as measured from the top edge of the toeboard to the level ...

A toeboard to prevent falling objects is only required at 6 feet or more. The second big difference is the load requirement. Cal-OSHA requires guardrails to be ...

The CSA Standard Z797-18 Code of practice for access scaffold also provides minimum load bearing and height requirements for guardrails and toeboards. In ...

Toeboard. 1. 4 inches (nominal) minimum in vertical height, toeboards are required on all open sides and ends of scaffolds at locations where persons are ...