23 окт. 2021 г. · The default setting of the FCLK is 800 MHz for Skylake processors; however, Intel's recommended value for desktops was 1000 MHz, so the 10x ratio setting ...

19 окт. 2023 г. · Stock FCLK is 800MHz on the 9900K. Some boards do set it at 1GHz by default, but above that is a mileage may vary situation.

2 дек. 2020 г. · Data is not complete yet, but in this game, clearly going from 1000 MHz FCLK to 1250 MHz FCLK yields a 6-7% improvement in performance.

1 февр. 2024 г. · I have my RAM running at 5600Mhz and my FCLK set to 2033. Would I be better off setting my FCLK to 1866 for better performance or should I ...

15 июл. 2021 г. · Yes there is a limit, usually around 4000mhz ram, you can run it desynchronized higher but it takes a hefty latency hit.

2 мар. 2021 г. · Z590 mainboards are capable of 4600-5333Mhz with relatively tight timing compared to what was capable before, now that comes with a desync latency penalty ...

14 мая 2023 г. · A proper 1:1:1 ratio between the Infinity fabric clock, memory frequency, and memory controller frequency.

19 июн. 2021 г. · I want to buy 4800mhz cl17 ram but I've recently heard about this infinite fabric thing where the ram has to be in a 1:2 ratio (fclk:MHz) with it.

13 мая 2024 г. · Try to boot with 6400mhz, then worry about fclk, then worry about timings, then voltage. If you have single tank A-die then you can pretty much do CL28 easy.

21 мар. 2024 г. · I can get 2200 FCLK but memory won't go above 6000. Bandwidth goes from about 68 to 70 GB/s with higher FCLK, but latency is a couple ns higher.