14 нояб. 2018 г. · 1GHz works at low bclk, once you start setting higher bclk then you will see instability or PC won't boot at all. There is some range of working frequency.

12 сент. 2023 г. · 150 MHz is perfect to get same frequencies for cpu/cache/ram as on 100 MHz BCLK. Frametimes and also loading spikes from the nvme are much ...

10 июн. 2021 г. · With the FCLK set to 1900 MHz, the latency creeps up by about 4 ns but at the same time, the memory write speed in AIDA also bumps up to 30400 ...

20 дек. 2021 г. · The best possible configuration would be DDR-3800 with the FCLK set to 1900Mhz for a 1:1 Ratio. Breaking 1:1 is worse and you'll need DDR4-5000 ...

24 июл. 2024 г. · That means at 2000MHz fclk typical for the DDR5-6000 sweet spot, the absolute maximum IF bandwidth is 64GB/s read and 32GB/s/chiplet write.

30 окт. 2023 г. · Put simply, not every CPU and motherboard are going to handle the Fclk at 2000 - lower it to 1800 and see if your slow boot issues go away. Use ...

Оценка 5,0 · W1zzard (TPU) 27 сент. 2024 г. · This means that you should keep FCLK at around 2000 MHz, which is set automatically by the BIOS. Actually, on my board it gets set to 2100 MHz, ...

16 нояб. 2020 г. · Either raise your memory frequency to 3800MHz, or lower infinity fabric to 1800Mhz. you have to set it manually to FCLK=UCLK if you go above 1800MHz infinity ...

25 сент. 2020 г. · Then you select the 3733 mhz frequency and set the FCLK manually to 1866 mhz. When setting manually, you must also change the voltages in the ...

Оценка 4,0 · W1zzard (TPU) 2 июн. 2020 г. · Just like on previous Intel CPUs it is possible to increase the BCLK frequency above its default of 100 MHz on most motherboards. This results ...