The requirements for testing harnesses included in EN 361 state that a full body harness shall withstand two successive drop tests with a load of a 100 kg mass.

In order to pass the test the harness must hold the dummy after both drops in a position not exceeding 50 degrees from the upright position. STRENGTH TESTS

Dynamic Load Test. Lanyard Should withstand a drop test using a 100kg test mass dropped from a height of 2 metres above the attachment point (the lanyard and ...

5 авг. 2024 г. · Dropped tool prevention products should be tested using a 10kg mass. Dropped tool prevention products are typically only rated to 2kgs (you will ...

18 июн. 2019 г. · Testing is carried out on an ANSI torso dummy which weighs 100kg and which is contoured with shoulders and defined bands and areas on the torso ...

16 июн. 2021 г. · EN 361: 2002 states that all safety harnesses need to be independently tested to a weight limit of 100kg.

This standard states that the harness has passed the free fall test involving a free fall drop with a 100kg weight in the harness to simulate a person.

6 окт. 2022 г. · Dynamic strength is tested by a 100kg dummy falling 4m, attached to the belt or lanyard via suitable means, and the test mass must be held ...

A 100kg test mass is attached to the test sample via a 2m reference lanyard. ... In order to pass the test, the harness must hold the dummy following both drops, ...

14 июн. 2022 г. · The dynamic tests involve dropping a 100kg mass through a 4-metre free-fall. Not all equipment is subject to this onerous test regime, notably ...