17 мая 2024 г. · No, even without the dimensions, it's two thin. 1/2 is for backs when you're making freestanding caser or interior walls for cases. If your ...

14 авг. 2013 г. · 1/2" is probably strong enough if you use a through bolt and a fender washer to spread the load out, 1/4-20 would be fine.

23 дек. 2022 г. · The 1/2” is a lot less stiff. Plywood is good under compression in the other orientation (on the flat side) but for a few dozen pounds you can make it work.

20 сент. 2023 г. · Really depends on the type of plywood. 1/2 inch Baltic birch with like 8 layers of ply? Yeah probably more then strong enough. MDF core plywood?

5 сент. 2023 г. · OP, 1/2 is plenty strong, but you may want to glue some blocking in the corners to keep it together. Upvote 4. Downvote Reply reply

2 мая 2024 г. · Any drawer box you're making that can be supported by normal retail drawer slides can be made out of 1/2 and be plenty strong.

9 окт. 2014 г. · I wouldn't trust one layer of half inch ply with very much weight. Ideally, replace the plywood with a couple of inches of solid wood benchtop.

14 окт. 2020 г. · Figure on an adult bike weighing 35lbs if its steel frame. And the length of the bikes will spread the weight over two joist spaces. You'll be fine.

18 мая 2022 г. · Is 1/2" plywood strong enough for a drawer 3' x 20" or should I go thicker? The drawer won't be holding a LOT of weight, maybe 10lbs.

17 апр. 2021 г. · They make screw in anchors that carry a rated 75 lbs., but that is on a vertical wall. What I would suggest is taking two pieces of 1/2" ply and ...