1 янв. 2018 г. · Just disconnect your iPhone from the charging cable. Then keep your iPhone/iPad face down and use a hair dryer aiming at the device's back right side and edge.

7 июн. 2020 г. · 1. Press and hold the power button and the home button for 10 seconds. 2. After that, still press the home button for 10 more ...

20 янв. 2022 г. · You might be able to walk away with a simple force restart. ... Check your cable. Make sure all the golden fingers are .. well, golden and intact.

23 авг. 2014 г. · Charging port might be dirty. battery connector loose connect. The BSI point of battery connector and near parts broke down ,open or remove ...

24 февр. 2018 г. · The main culprits for a boot loop on iPhone 7 after a screen replacement would normally be a damaged home button (or home button flex cable), ( ...

23 окт. 2017 г. · The problem may be related to the replacement screen, the original impact or a bad battery. Ultimately, it may also be a logic board issue ...

4 авг. 2021 г. · The first thing you need to try is disconnecting the top flex and see if it still boot-loops as this is the major cause on the 7 series. If it ...

17 дек. 2020 г. · After trying to do a housing transfer, the phone got put in a boot loop, but only whenever the charging port was plugged into the logic board.

25 авг. 2017 г. · Try force restart, press and hold power button and Home button at the same time about 10s until you see an Apple Logo then release it.

25 мая 2019 г. · Try replacing tristar as it can cause stuck on apple logo. I've had one point where it would have no display but show 0.17A on the DCPS, ...