1 янв. 2021 г. · Go to Bridge-->Ports and set the PVID for the port. This is valid for CRS3XX units or for devices that don't support VLANs.

25 мар. 2023 г. · This right here is all you need to correctly configure VLANs on MikroTik and any Linux based NOS using bridge.

30 июн. 2023 г. · Hi all, I have several MikroTik CRS switches in a flat network that uses the default bridge and untagged network switching fabric.

30 дек. 2023 г. · The short version is, from within the bridge menu, create the VLAN ids on the bridge, assign the bridge itself to all VLANs as tagged, add the physical ports ...

15 дек. 2022 г. · Have a trusted VLAN for your devices that should have access. Have it routable to the management VLAN. Then have the default VLAN and other ...

29 февр. 2024 г. · The default VLAN should be always the Management VLAN. That is where your router/firewall lives, and your Access Points.

18 июн. 2024 г. · I'm trying to create hybrid ports on my home HAP AC2 & I just can't seem to get it right from a config standpoint. In short: ports 2-4 should be untagged VLAN ...

28 июл. 2023 г. · What I want to do initially is set VLAN 100 on all ports (e.g., 10.30.100.0/24), including for management to be able to connect to the switch ...

25 окт. 2023 г. · I'd like to create three VLANs (10, 20, 30) and have all three on the SFP+ port as a trunk to a downstream switch.

4 апр. 2023 г. · The bridge needs to be tagged on a vlan if you want to be able to reach/manage the router via the IP address on that vlans interface.