16 мая 2019 г. · You may be able to reduce the noise by Duck Taping it! because this may reduce the vibration created by the friction. If you were able to reduce ...

24 мая 2020 г. · The problem could be the screws on the side that hold the lean that are too tight. Take off the magnetic plastic piece and loosen them up a little.

18 сент. 2023 г. · Some say to remove the seat and spray wd40 silicone (Which is very expensive) in some holes beneath the seat. Another could be a pair of "screws ...

19 нояб. 2020 г. · My fix: was simply loosening the bolts that connect the mechanism to the bottom of the chair. I just loosened the 4 bolts, then tightened them ...

12 нояб. 2023 г. · If there's creeking/screeching while turning the chair or leaning back, that's the hydraulic parts of the chair, I had the same. There's this ...

23 дек. 2022 г. · It's probably going to be inside the black cylinder, the “lean back” spring that is made more stiff by twisting the tensioner. Lubricating ...

28 апр. 2020 г. · There's probably no need to go crazy with the lube. A few drops of 3 in 1 oil on the coil springs and any pivoting joints should do the trick.

10 сент. 2021 г. · For me it was tension adjustment dial/spring. I had to pull aside the accordion cover and spray some lithium grease towards the bottom where it meets the metal ...

8 авг. 2022 г. · I just fixed this issue with a little wd40 where the joint moves. Hard to describe where but find a part that moves and lubricate it.

20 февр. 2022 г. · The solution was to cover the entire chair with half a can of lithium grease? Wow! Upvote