The maximum permissible spans for 2x10 inch or wider planks shall be as shown in the following table.

19 авг. 2022 г. · The front edges of the platforms should not exceed 36cm from the work face. If this is the case then the platforms must have guardrail systems.

Check to see if 10-foot or shorter planks are 6 to 12 inches over the center line of the support, and that 10-foot or longer planks are no more than 18 inches ...

28,00 $ В наличии OSHA requires 6″ but many contractors opt for 12″. 80.5″ boards are a special cut designed for use with Non-Stop Scaffolding; Other Types of Boards, Planks and ...

Specific grades of three wood species can meet OSHA's requirements for scaffold planking: Grade 180a Sitka spruce, Grade 171b Douglas fir, and Grade DI-65 ...

Engineered Wood Scaffold Plank. Identification. Mandatory Requirements ... It is a mandatory requirement to visually inspect scaffold planks before each use.

(f) (1) Except as specified in other Orders, all planking shall be at least equivalent to 2-inch x 10-inch (nominal) lumber selected for scaffold grade plank as ...

22 мар. 2024 г. · The planking used on scaffolds must have the capacity to withstand at least four times its intended load, in addition to its own weight, without ...

53,50 $ В наличии 2" x 10" x 16' OSHA Scaffold Plank (DI-65) Weight : 64 Lbs Material : Solid Sawn DI-65 Grade-stamped Southern Yellow Pine Edges are Clipped to reduce end- ...