9 нояб. 2012 г. · Take a chisel (1/4" will do) and slice the nuts from below on each side of the screw. Just hand force should slice through the nuts, probably no ... How to remove this stripped out plastic screw holding toilet seat ... How can I remove a plastic nut from a metal bolt so I ... - Reddit How to remove plastic toilet seat bolt with stripped head? - Reddit Другие результаты с сайта www.reddit.com

27 июн. 2018 г. · Try tightening first then try opening again. Could try WD-40. Helpful Reply.

24 июл. 2012 г. · Get a hack saw blade and cut then off. Right between the top of the bowl and in between the seat. Use a blade without the handle. Wear gloves ...

22 февр. 2022 г. · Last resort is to get a small handsaw with metal blade and cut it off. Have you tried a socket on the brass nut? You have any more pictures?

Turn the nut counterclockwise to unscrew. If it won't budge, spray with rust penetrant and wait five or ten minutes for the spray to work. Repeat the process ...

5 янв. 2020 г. · You could cut a slot in the end of the screw so you can (try to) turn it with a screwdriver. In this case, clockwise to un-do. Or you could use ...

10 мар. 2022 г. · With older toilet seats, you may have to use a lubricant, like WD-40, to loosen them if they won't budge. Metal bolts can be harder to remove, ...

Продолжительность: 6:41
Опубликовано: 30 окт. 2020 г.

2 февр. 2009 г. · Cut the nut with a dremel tool or a single hacksaw blade; sometimes you can carefully use a sawzall. You just need to cut thru half of it and then split it off.

19 нояб. 2020 г. · Use a couple of purpose built pipe wrench s. One on the fitting and one on the pipe you are trying to remove it from. Be sure the wrenches are ...