For application using a pushed broadcast spreader, Scotts recommends a setting of 5 1/2 when overseeding and a bare-lawn setting of 8 1/4 . With a handheld broadcast spreader, Scotts recommends a setting of 4 when overseeding or seeding a new lawn but suggests that the sower make two perpendicular passes for new areas.
We recommend using the following spreader settings. Scotts Spreaders Basic, Turf Builder, EdgeGuard Mini, Standard, Deluxe EdgeGuard, Turf Builder EdgeGuard ... |
Open the downloaded product label to find the spreader setting based on your specific spreader and the type of application. |
*Go over lawn twice. **Go over lawn three times. Plesase consult your spreader manual for spreader settings. Contractors Mix (South) |
27 авг. 2011 г. · When applying grass seed for a new lawn, or repairing bare spots, set the orange dial to 13. For overseeding applications, set the dial to 7 1/2. |
10 сент. 2022 г. · You can also check a Scott's label for the same type of seed and check the settings on it. Upvote Overseeding-Raking seed in and Scotts Edgeguard broadcast ... Any tricks for figuring out Scott Broadcast Spreader settings for ... Scotts Mini Broadcast Spreader settings for non Scott products ... Другие результаты с сайта www.reddit.com |
Spreader Not Listed - Setting Tip: Set spreader at 1/4 to 1/3 of the dial as a starting point. This is just a guide, alsways calibrate spreader. Note: These are ... |
17 окт. 2019 г. · It is recommended to use half the rate and do a "twice" over (cross-hatch) pattern to compensate for the unevenness. |
Grass seed germinates best when temperatures are between 60° and 80° F. ... Large Areas: Apply using a Scotts® drop or broadcast push spreader. Scotts® Spreader ... |
Videolar Запросы по теме
| Novbeti > |
| Axtarisha Qayit Anarim.Az Anarim.Az Sayt Rehberliyi ile Elaqe Saytdan Istifade Qaydalari Anarim.Az 2004-2023 |