The calculation is simple: divide the total energy consumption by the desired heating time. Please note that the heating time should not be so long.

The total required heat to increase and maintain the temperature in an outdoor pool can be calculated as h total = h surface + h heat-up.

15 окт. 2024 г. · The maximum heating time should be 4 hours per 1 ° C water temperature. This is calculated by the heat loss during the night being up to 2°C ...

16 апр. 2024 г. · For a convenient guideline, determine your pool's heating needs by dividing its volume using a conversion factor of 2500.

16 июн. 2016 г. · Swimming Pool Heating selection and design has been made in the research necessary resources to be used in heating load calculations.

11 окт. 2023 г. · To calculate the energy consumption of your swimming pool heat pump, use the following formula: Energy Consumption (kWh) = Heat Pump Power (kW) x COP x Heating ...

8 мар. 2010 г. · These calculations assume the pool is covered during heat up. For uncovered pools or pools sited in a water table, multiply heater output by 1.4 ...

7 авг. 2018 г. · In order for 20,000 gallons of pool water to heat 30 degrees, you would do the following calculations: 20,000 (gallons) x 8.3 (water ...

The information used to calculate your pool heating requirement is only an estimate and based on figures provided by you.

formula may be used to calculate their thermal output. Btu/time period = kWh/time period x 3413 x COP. 2.2 CALCULATING HEAT ,LOSSES FRGM SWIMMING POOLS AND SPAS ...