2 нояб. 2018 г. · Buy a set of new bolts and replace the bad set. The one that loosens is stripped or contaminated or manufactured poorly.

7 янв. 2016 г. · I bought an impact screwdriver from Amazon and went to work. Using a small sledge hammer the first bolt finally loosened after about 30 blows.

20 июл. 2020 г. · Make sure the nut head can be removed w/o the plastic stopping it. This will break the plastic part, but that usually comes with a new seat.

5 янв. 2020 г. · That is called a blind jack nut, jack nut, blind collapsing nut, etc. Parts of blind jack nut assembly. They are typically used when you ...

8 февр. 2021 г. · If the bolts are REALLY loose, you may need to use a screwdriver on the heads while you hold the thumbscrews or wingnuts on the bottom. Each ...

9 нояб. 2020 г. · There should be a button to press which will release the seat from its hinge post on either side. If it's not the large silver knob then it may be hidden.

29 июл. 2019 г. · The tool to get a proper bite on the nut is a crow foot wrench attachment. You'll be able to get a cockeyed bite on the nut using a typical wrench in order to ...

18 нояб. 2023 г. · It is probably years of gunk holding it in place. Spray it liberally, with almost anything - water, lemon juice, vinegar. Leave it to soak for 10s of minutes.

7 июн. 2020 г. · Try some WD40 or other penetrating oil under the wingnut and let it sit for a few minutes and then try turning them with large pliers or vise grips.

15 окт. 2011 г. · Best practice is to hand tighten nuts, sit on toilet to assist with setting wax ring, tighten nuts to a point of being snug and alternate tightening nuts.