Where rigid pipes are to be encased in concrete, movement joints should be: provided around the spigot next to the socket either at 5m maximum intervals or ... |
Pipes passing through substructure walls should accommodate movement by: · a 50mm clearance all round · a sleeve, with 50mm clearance all round and suitably ... |
1 Where it is necessary to run a pipe beneath a building it should be sleeved so that it can be withdrawn. Water pipes in buildings should be exposed to ... Не найдено: rigid | Нужно включить: rigid |
Where drains pass under buildings, access to the installation must be provided outside of and as close as possible to the building at the pipe entry and ... |
A pipe that passes through a foundation wall shall be provided with a relieving arch, or a pipe sleeve shall be built into the foundation wall. The sleeve shall ... |
Pipes that are made of a rigid material must be encased in concrete that ... Flexible pipe must be protected by a concrete slab that is laid over the pipe. SANS 10400-Part P, Drainage... · Introduction |
[PDF] Building Regulations 2010 - GOV.UK assets.publishing.service.gov.uk › media › BR_PDF_AD_H_2015
2.28 Pipes also need to be protected from damage and if the limits of cover are not attainable it may be possible to choose another pipe strength and pipe ... |
6 окт. 1999 г. · Where a short length of pipe is to be built into a structure, a suitable wall protection sleeve, complete with couplers placed within 150mm of. |
Rigid Pipes and Joints Adjacent to Structures. 1. Where rigid pipes are used, a flexible joint shall be provided as close as is feasible to the outside face ... |
| Novbeti > |
| Axtarisha Qayit Anarim.Az Anarim.Az Sayt Rehberliyi ile Elaqe Saytdan Istifade Qaydalari Anarim.Az 2004-2023 |